|
Remotely switched electrically. Bosch ‘U’ type fixing bracket. Rated at 300 amps continuous, 600 amps for 20 seconds and 2400 amps for 1 seconds. M10 and M5 studs.
Additional Emergency LED Switch for 0-605-31 0-605-36 0-605-34 0-605-46 0-605-35 0-605-47
With auxiliary circuit remotely switched electrically. Bosch ‘U’ type fixing bracket. Rated at 300 amps continuous, 600 amps for 20 seconds and 2400 amps for 1 seconds. M10 and M5 studs.
Durite battery disconnect switch features a fixed lockable handle which cuts all power from your vehicle electrical system, helping to mitigate the risks found in an area 1 of FATAL 6. It also can be used to switch two circuits in a vehicle electrical system simultaneously (24V and 12V).
Battery isolator, 24 volt, double pole, remotely switched electrically. Isolated return. Rated 250 amps at 24 volts and 2,500 amps for 5 seconds. Terminal sizes M10 and M5. Protected to IP65. CE approved.
Battery Switch 250 amp Double Pole with Removable Key
Stop Light Air Switch - 0.15 bar
2.2psi / 0.15bar, M12 x 1.5. Rated 5 amps at 24 volts. Replaces Wabco 441 014 019 0.
Battery isolator with removable key in the ‘Off’ position. Rated 250 amps at 24 volts and 2500 amps for 5 seconds. M10 studs, requires 30mm hole. Supplied with 2 keys.
Marine double pole battery isolator with fixed handle. Rated 250 amps at 24 volt and 2500 amps for 5 seconds. Connects or disconnects both poles simultaneously. M10 studs.
Low Air Pressure Warning Switch - 5.0 bar
72.5psi / 5.0bar, M12 x 1.5. Replaces Wabco 441 014 015 0.
Emergency push button battery isolator. Turn button 45° to switch on, push to disconnect. Rated 150 amps at 48 volts and 1000 amps for 10 seconds. M8 studs and requires 41mm hole. Protected to IP66.
Marine battery isolator with fixed control knob with padlock hole. Rated at 550 amps continuous (1hr) and 2500 amps for 5 seconds, max 48 volts dc. M12 studs. l 102 x w 90 x h 102mm. CE approved.
5 Position Water-Resistant Ignition Switch with 14607 Key
4 Position Water-Resistant Ignition Switch - Accessory/Off/Accessory and Ignition/ Start
5 Position Water-Resistant Ignition Switch with Unique Key
Battery isolator with removable key, 8mm lock hole and splashproof cover. Rated 250 amps at 24 volts and 2500 amps for 5 seconds. M10 studs and requires 24mm hole.
Battery isolator with fixed handle. Rated 250 amps at 24 volt and 2500 amps for 5 seconds. M10 studs and requires 30.5mm hole. Replaces Ford / Iveco 4822229.
Battery isolator with removable key in the ‘Off’ position. Rated 75 amps at 24 volts, 200 amps for 5 seconds. M10 studs and requires 22.5mm hole. Supplied with 2 keys.
Battery isolator with removable key in the ‘On’ or ‘Off’ positions. Rated 100 amps at 24 volts, 500 amps for 5 seconds. M10 studs and 22.5mm hole. Supplied with 2 keys.
Marine battery isolator and change over switch with solid copper contacts. Rated 310 amps continuous and 500 amps for 5 minutes, max 36 volts dc. Selects between batteries one, two, both or off. M10 studs. l 160 x w 72 x h 160mm.
Double pole battery isolator with fixed handle. Rated at 125A continuous at 125A per second and 500A for 15 seconds. 3/8”- 24 studs and requires 18.6mm hole.
Durite’s Single Pole Single Throw On/Off Isolator with removable handle. Used for isolating vehicle battery's. 24VDC Max. 150A Continuous. 1000A Max for 5 Seconds. M10 Terminals Tightening Torque 0.9+ - 0.1 daNm. Copper Contacts. Connections not polarized. Protected to IP65.
Battery isolator. Rated 250 amps at 24 volts and 2150 amps for 5 seconds. M10 terminals. Requires 30.5mm hole. Protected to IP67.
Marine battery isolator with removable key and splashproof cover. Rated 75 amps at 24 volts, 200 amps for 5 seconds. M10 studs and requires 22.5mm hole. Protected to IP67.
Marine battery isolator with removeable control knob (in the 1 or 2 position). Rated at 300 amps continuous (1hr) at 48 volts dc and 1000 amps for 5 seconds. Selects between batteries one, two, both or off. M10 studs. l 69 x w 77 x h 69mm. CE approved.
Steering Column Indicator or 3 Way Switch
Steering column indicator switch or on/off/on, three position single pole switch, for mounting on 35-40mm diameter column, stalk length 121mm. Rated 6 amps at 12 volt dc and 3 amps at 24 volt dc.
4 Position Ignition Switch - Off/Ignition/Pre-Heat/Start
Battery isolator with removable handle. Rated 250 amps at 24 volts and 2150 amps for 5 seconds. M10 Terminals. Requires 24mm hole. Protected to IP54.
Marine battery isolator with removeable control knob (in the off position). Rated at 300 amps continuous (1hr) at 48 volts dc and 1000 amps for 5 seconds. M10 studs. l 69 x w 77 x h 69mm. CE approved.
2 Position Ignition Switch - On/Off
Supplied with two universal keys.