Home
::
|
Enables activation of dual-output E-boost / E-mark compliant modes. Compatible with Linear high performance LED driving lights.
Replacement E-Boost cap, compatible with Sentinel high performance LED driving lights. Enables activation of dual-output E-boost / E-mark compliant modes on compatible lights.
Replacement E-Boost cap, compatible with Triple-R high performance LED driving lights. Enables activation of dual-output E-boost / E-mark compliant modes on compatible lights.
The Linear Stay Bar kit comprises a 2mm stainless steel stabilising 'arm', comprising two parts, which fits to the Lazer Lamps range of Linear LED spotlights. The stabilising arm is secured to the lamp using the supplied bracket, before fixing to an additional rigid mounting location on your vehicle, thereby reducing vibration, stress, and movement which can affect some light installations. Suitable for a single Linear spotlight.
The Sentinel Stay Bar kit comprises a 2mm A2 stainless steel stabilising 'arms', comprising two parts, which fits to the Lazer Lamps range of Sentinel LED spotlights. The stabilising arm is secured to the back of the lamp through a pre-drilled hole with thread-forming bolt thereby reducing vibration, stress, and movement which can affect some light installations. Suitable for a single Sentinel spotlight.
The Stay Bar kit comprises a 2mm black coated stainless steel stabilising 'arm', comprising two parts, which fits to the Lazer Lamps range of Triple-R or ST Evolution range of LED spotlights. The stabilising arm is secured to the lamp using the supplied low profile bracket, before fixing to an additional rigid mounting location on your vehicle, thereby reducing vibration, stress, and movement which can affect some light installations.
The Two-Lamp Link Piece is specifically designed to fit between a pair of Lazer High Performance LED lights (ST Evolution or Triple-R) to provide added stability to your light installation, while also ensuring the lights are perfectly aligned. Made from extruded aluminium, with an anodised satin black finish, the link piece slots into the upper, or lower, channels of a pair of lamps and is held securely in place by 4 grub screws.
When connecting to 24V vehicle systems, the 4-pin 24V relay is available as a direct substitute for the supplied 12V relay. The 24V relay plugs directly into place while also benefiting from the same waterproof housing to ensure trouble-free electrical installation for years to come. Compatible with all new Lazer wiring harness kits.
The 3m flat cable extension kit is ideal for custom builds and mounting which requires additional wiring to the lights. Includes IP68 connectors at either end.
The Y-Splitter complete with 2-pin superseal connections, is the ideal solution for wiring multiple low power Lazer Lamps avoiding the need for additional wiring kits run in parallel. The splitter is an ideal solution for wiring 3 or more lights, where the power rating of each light is 75W or less, and a corresponding 4-Lamp Wiring Kit doesn’t already exist for example.
A range of lens covers for the Sentinel lamps. Made from polycarbonate, the covers clip securely to the lamps offering an additional layer of protection or styling to the lamps, or in the case of the amber lens cover, the option to convert the colour temperature of the light to selective yellow.
A range of lens covers for the Sentinel lamps. Made from polycarbonate, the covers clip securely to the lamps offering an additional layer of protection or styling to the lamps, or in the case of the amber lens cover, the option to convert the colour temperature of the light to selective yellow.
A range of lens covers for the Sentinel lamps. Made from polycarbonate, the covers clip securely to the lamps offering an additional layer of protection or styling to the lamps, or in the case of the amber lens cover, the option to convert the colour temperature of the light to selective yellow.
When mounting auxiliary driving lights to the rear Sports Bar of a pick-up, or other locations where the lighting performance might benefit from the lamps being in a more elevated position, the 50mm spacer kit is the ideal solution. Designed for use with Lazer Lamps’ 76mm (3”) Tube Clamps, the spacer kits come supplied as pairs, with M8 x 80mm bolts to facilitate fixing.
Our anti-theft kit offers customers the peace of mind of fixing their products with additional protection against theft. The A2 grade stainless steel security screw kit is specifically designed and recommended for use with Lazer Centre Mounting Kit (1114k) and/or Side Mount Kit (1118k) (ST/T and Triple-R).
The Linear Anti-Theft Side Bracket Kit offers customers peace of mind of fixing products with extra protection against theft. The stainless steel brackets are pre-treated for maximium corrosion resitance then poweder coated black. The supplied fasteners are all A2 stainless steel and have a unique locking key both in respect of fixing the lights to the brackets, and the brackets to the vehicle.
Linear centre mounting bracket includes A2 stainless steel hardware combined with extremely tough PA66 GF30 (glass filled nylon) ruggedised mounts. The mount fixes into the channel on the back of the Linear heatsink, and secured using M5 grub screws. Bracket orientation can be reversed in order to have the light mounted upwards or hanging down relative to the vehicle mounting point. Mounting kit includes anti-rotation features.
Pre-treated with an e-coating for maximum corrosion resistance, then powder coated black for a sleek finish, the side bracket kit from Lazer offers versatility and sleek styling, when combined with the Linear high performance LED spotlights. A2 stainless steel hardware included. Bracket orientation can be altered in order to raise/lower the light <13mm relative to the vehicle mounting point.
Centre mounting bracket includes A2 stainless steel hardware combined with extremely tough PA66 GF30 (glass filled nylon) ruggedised mounts. Mounts can be fitted above or below lights using M5 grub screws to locate within the lamp mounting channels. Bracket orientation can be reversed in order to push the light further forward/backwards relative to the vehicle mounting point.
Pre-treated with an e-coating for maximum corrosion resistance, then powder coated black for a sleek finish, the side bracket kit from Lazer offers complete versatility and mounting flexibility, combined with sleek styling. A2 stainless steel hardware included. Bracket orientation can be altered in order to raise/lower the light <3cm relative to the vehicle mounting point.
The 3m cable extension kit is ideal for custom builds and mounting which requires additional wiring to the lights. Includes IP68 connectors at either end.
The 3m cable extension kit is ideal for custom builds and mounting which requires additional wiring to the lights. Includes IP68 connectors at either end.
Black lens cover with printed Lazer logo design, designed for ST Evolution high performance LED spotlights. The lenses are made from acrylic and secured in place using 4 clips, supplied with each lens.
Utilising 3mm folded aluminium, which is given a corrosion resistant pre-treatment, then black powder coated, the latest side brackets from Lazer offer a lightweight versatile solution for mounting any Lazer High Performance light. The bracket kit completes the sleek styling of the products and vehicle integration.
The Front Runner Roof Rack Mounting Kits enable mounting of Lazer Lamps’ high performance LED light bars to the underside of the front of the roof rack system for a simple, secure install.
The Rhino-Rack Roof Rack Mounting Kits enable mounting of Lazer Lamps’ high performance LED light bars to the underside of the front of the roof rack system for a simple, secure install.
The amber lenses for the ST4 Evolution lights alters the standard 5000 kelvin colour temperature to selective yellow. Available either as a flat (0 degree) or reeded (15 degree) lens cover, the amber lenses are regarded as improving visibility in rain, fog, and snow conditions. The lenses are made from acrylic, and feature a gasket which helps prohibit water and dust getting between the lenses. The reeded lens is secured in place using 4 spring clips supplied with each lens.
The amber lenses for the ST4 Evolution lights alters the standard 5000 kelvin colour temperature to selective yellow. Available either as a flat (0 degree) or reeded (15 degree) lens cover, the amber lenses are regarded as improving visibility in rain, fog, and snow conditions. The lenses are made from acrylic, and feature a gasket which helps prohibit water and dust getting between the lenses. The reeded lens is secured in place using 4 spring clips supplied with each lens.
Reeded lens for the ST Evolution lights increases the angle of the beam pattern by varying amounts, while also eliminating any potential dark spots when using multiples of lights in combination (dependant on application and setup). The lenses are made from acrylic, and feature a gasket which helps prohibit water and dust getting between the lenses. The reeded lens is secured in place using 4 spring clips supplied with each lens.
The amber lenses for the Triple-R lights alters the standard 5000 kelvin colour temperature to selective yellow. Available either as a flat (0 degree) or reeded (15 degree) lens cover, the amber lenses are regarded as improving visibility in rain, fog, and snow conditions. The lenses are made from acrylic, and feature a gasket which helps prohibit water and dust getting between the lenses. The reeded lens is secured in place using 4 spring clips supplied with each lens.