|
Replacement blank key for 0-605-13.
Replacement Key for Battery Isolator 0-605-90
Durite 0-605-99 Replacement Key for Battery Isolator 0-605-00 PN:0-605-99
Blank Key for Battery Switch 0-605-20 0-605-21 0-605-61
Battery isolator with removable key and splashproof cover. Rated 100 amps at 24 volts and 500 amps for 5 seconds. M8 studs and requires 24mm hole.
Spare key for 0-605-05, 150A battery switch.
Marine emergency cut-off switch with lanyard, cut-out can also be operated with lanyard clip in place by pressing knob, suitable for coil or magneto ignition. 6.3mm blade terminals, 16mm panel hole. Rated at 15 amps at 12 volts.
For 5 seconds. M10 studs and requires 19.5mm hole. Replaces SSB106.
Replacement Key for Battery Isolator 0-605-65
Blank Key for Heavy Duty Battery Switch 0-605-50 0-605-51
For 5 seconds. M10 studs, requires 19.5mm hole and two 4mm fixing holes. Replaces SSB103.
Marine battery isolator with removeable control knob (in the off position). Rated at 300 amps continuous (1hr) at 48 volts dc and 1000 amps for 5 seconds. M10 studs. l 69 x w 77 x h 69mm. CE approved.
Battery isolator with removable handle. Rated 250 amps at 24 volts and 2150 amps for 5 seconds. M10 Terminals. Requires 24mm hole. Protected to IP54.
Battery isolator with removable key and splashproof cover. With independent ignition switching and controlled earth leakage through a resistor to avoid damage through load dumping. Rated 100 amps at 24 volts and 500 amps for 5 seconds. M10 studs.
Marine battery isolator with removeable control knob (in the 1 or 2 position). Rated at 300 amps continuous (1hr) at 48 volts dc and 1000 amps for 5 seconds. Selects between batteries one, two, both or off. M10 studs. l 69 x w 77 x h 69mm. CE approved.
Marine battery isolator with removable key and splashproof cover. Rated 75 amps at 24 volts, 200 amps for 5 seconds. M10 studs and requires 22.5mm hole. Protected to IP67.
Battery isolator. Rated 250 amps at 24 volts and 2150 amps for 5 seconds. M10 terminals. Requires 30.5mm hole. Protected to IP67.
Durite’s Single Pole Single Throw On/Off Isolator with removable handle. Used for isolating vehicle battery's. 24VDC Max. 150A Continuous. 1000A Max for 5 Seconds. M10 Terminals Tightening Torque 0.9+ - 0.1 daNm. Copper Contacts. Connections not polarized. Protected to IP65.
Double pole battery isolator with fixed handle. Rated at 125A continuous at 125A per second and 500A for 15 seconds. 3/8”- 24 studs and requires 18.6mm hole.
Marine battery isolator and change over switch with solid copper contacts. Rated 310 amps continuous and 500 amps for 5 minutes, max 36 volts dc. Selects between batteries one, two, both or off. M10 studs. l 160 x w 72 x h 160mm.
Battery isolator with removable key in the ‘On’ or ‘Off’ positions. Rated 100 amps at 24 volts, 500 amps for 5 seconds. M10 studs and 22.5mm hole. Supplied with 2 keys.
Battery isolator with removable key in the ‘Off’ position. Rated 75 amps at 24 volts, 200 amps for 5 seconds. M10 studs and requires 22.5mm hole. Supplied with 2 keys.
Battery isolator with fixed handle. Rated 250 amps at 24 volt and 2500 amps for 5 seconds. M10 studs and requires 30.5mm hole. Replaces Ford / Iveco 4822229.
Battery isolator with removable key, 8mm lock hole and splashproof cover. Rated 250 amps at 24 volts and 2500 amps for 5 seconds. M10 studs and requires 24mm hole.
Marine battery isolator with fixed control knob with padlock hole. Rated at 550 amps continuous (1hr) and 2500 amps for 5 seconds, max 48 volts dc. M12 studs. l 102 x w 90 x h 102mm. CE approved.
Emergency push button battery isolator. Turn button 45° to switch on, push to disconnect. Rated 150 amps at 48 volts and 1000 amps for 10 seconds. M8 studs and requires 41mm hole. Protected to IP66.
Marine double pole battery isolator with fixed handle. Rated 250 amps at 24 volt and 2500 amps for 5 seconds. Connects or disconnects both poles simultaneously. M10 studs.
Battery isolator with removable key in the ‘Off’ position. Rated 250 amps at 24 volts and 2500 amps for 5 seconds. M10 studs, requires 30mm hole. Supplied with 2 keys.
Battery Switch 250 amp Double Pole with Removable Key
Battery isolator, 24 volt, double pole, remotely switched electrically. Isolated return. Rated 250 amps at 24 volts and 2,500 amps for 5 seconds. Terminal sizes M10 and M5. Protected to IP65. CE approved.