Power Management

The Alfatronix PowerTector Battery Guard is a solid state battery device that will monitor the source voltage and disconnect the equipment from the battery if the voltage falls below a pre-determined level. 

Remote suitable for Ring Pure Sine Wave/ Modified Sine Wave Inverters & RCD Versions

The Ring Automotive 12v, 1000w PowerSourcePro modified sine wave inverter with twin sockets is an ideal leisure accessory and is safe to use on equipment rated up to 1000w

[Old Part number RINVM1000]

The Ring Automotive 12v, 3000w PowerSourcePro modified sine wave inverter with twin sockets is an ideal leisure accessory and is safe to use on equipment rated up to 3000w

The Ring Automotive 24v, 2000w PowerSourcePro modified sine wave inverter with twin sockets is an ideal leisure accessory and is safe to use on equipment rated up to 2000w

The 24v, 1000w PowerSourcePure pure sine wave inverter with twin sockets provides a distortion-free 230v mains power source and is an ideal leisure accessory and is safe to use on equipment rated up to 1000w 

The 12v, 3000w PowerSourcePure pure sine wave inverter with twin sockets provides a distortion-free 230v mains power source and is an ideal leisure accessory and is safe to use on equipment rated up to 3000w

Integrated Earth leakage protection (RCD), Direct wired AC outputs provides a more integrated solution, Pure Sine Wave output ensures the best appliance compatibility, Provides power for up to 12 hours of continuous use

Remote suitable for Ring Pure Sine Wave/ Modified Sine Wave Inverters & RCD Versions -  Suitable for all the OLDER Ring inverters [if your inverter ends in 2 digits then the RINVLED is required

The Ring Battery Shield is the ideal solution to prevent flat batteries and battery failure by over discharging.

Ring RCB312 2A automatic workshop bench charger, suitable for 6V and 12V vehicles up to 5L. Suitable for lead acid and gel batteries, ideal for cars, motorcycles, boats, quads, lawn mowers and more. The charger will automatically detect when the battery is fully charged, switching to a lower charge rate, protecting the battery from overcharging.

Ring RCBT27 27A high capacity battery charger, suitable for 12V and 24V vehicles with batteries between 30Ah and 300Ah. Ideal for cars, vans, lorries, commercial vehicles and agricultural vehicles. Also has a 150A engine start, to jump start batteries. The rugged metal casing is ideal for tough conditions, and it also features long, 1.5m cables and heavy duty battery clamps, suitable for large vehicles. The ammeter displays charging status, and the RCBT27 includes both slow and fast charging options. Thermal and overload protection included. 

Ring RCBT35 Professional 35A workshop charger with 180A jump starter. Suitable for 12V and 24V vehicles, ideal tool for a fleet of mixed vehicles including cars, LCV and HGVs. Includes selectable charging and jump start functions, so it can charge at different amp rates for a quicker recharge or, when needed, jump start a flat battery.

Ring RCBT55T 55A trolley battery charger and jump starter, for 12V and 24V vehicles with lead acid batteries. Ideal tool for a fleet of mixed vehicles including cars, LCV and HGVs. Ideal to jump start and charge from just one unit.