Lazer Lamps

The Bumper Beam Mounting Kit for the VW Golf MK7 is a specially engineered mounting solution that allows for the fitting of a range of Lazer High Performance LED Driving Lights, fixed directly to the bumper beam of the vehicle, behind the lower front grille, for a totally secure and discreet auxiliary light install.

The ideal solution for wiring a pair of E-mark approved Lazer high performance LED spotlights to the roof or sports bar of your vehicle. The setup is quick, easy, and reliable with 2-pin superseal connections and no configuration procedures. The kit features a 12V relay (in waterproof housing), 35A fuse, a battery terminal at one end, and 3.2m of flat-profile flex on both lamp cables, and allows for the operation of Lazer products either in parallel with the standard lighting on the vehicle, and/or via an independent switch which can be mounted inside your vehicle.

The 2m flat cable extension kit is ideal for custom builds and mounting which requires additional wiring to the lights, where the installer would like to use a cable with narrow cross-section, to they can run the wiring behind bodywork trim. The unique 7.2mm x 3.6mm geometry allows this 3-core cable to be pushed in to gaps such as between the two roof elements on the L663 Defender (for use in conjunction with our Defender roof pods), and also on some other vehicles between the windscreen glass and A-pillar (please check your vehicle). This may help mitigate the requirement for drilling a hole in a vehicle roof when wiring roof lights.

The 3m flat cable extension kit is ideal for custom builds and mounting which requires additional wiring to the lights. Includes IP68 connectors at either end.

The 3m cable extension kit is ideal for custom builds and mounting which requires additional wiring to the lights. Includes IP68 connectors at either end.

When mounting auxiliary driving lights to the rear Sports Bar of a pick-up, or other locations where the lighting performance might benefit from the lamps being in a more elevated position, the 50mm spacer kit is the ideal solution. Designed for use with Lazer Lamps’ 76mm (3”) Tube Clamps, the spacer kits come supplied as pairs, with M8 x 80mm bolts to facilitate fixing.

The Lazer tube clamp range allows for the quick and simple installation of Lazer High Performance Lighting to a horizontal bar(s). Made from stainless steel, and with an electro-polished matt effect plus Lazer logo etched on the front of the clamp (42mm and 60mm versions only), the clamp compliments the high-end styling of the Lazer range with reliability and durability assured.

Our anti-theft kit offers customers the peace of mind of fixing their products with additional protection against theft. The A2 grade stainless steel security screw kit is specifically designed and recommended for use with Lazer Centre Mounting Kit (1114k) and/or Side Mount Kit (1118k) (ST/T and Triple-R).

The Lazer Contactless Reader allows for reading the CAN-Hi and CAN-Lo vehicle data without any actual metal to metal connection between the interface and the vehicle CAN wiring. The reader is secured around a section of the vehicle CAN Bus wiring and data is read by an induction method, thus protecting any manufacturers warranty.

The CanM8 Cannect Duo (Speed Pulse & High Beam) Interface is a 2-output CAN Bus interface which provides a quick solution for detecting high beam activity on vehicles which feature CAN Bus wiring. The Cannect Duo Interface also features a square pulsed speed signal output from the vehicle at a frequency of 10Hz. Each interface comes supplied with a dedicated wiring kit for simplified installation, as well as compatibility with our Contactless Reader which avoids the need for metal-to-metal connection.

For an OE quality, auxiliary spotlight installation, the Lazer Grille Integration Kits include bespoke mounting brackets which allow for quick and easy fitting of Lazer High Performance LED Spotlights within the front grille of the most popular road cars, pick-up trucks, and light commercial vehicles. Designed to blend seamlessly within the original styling of each vehicle, the resulting lighting setup remains fully robust and secure, with extra protection against theft.

Specifically engineered for the Ford Ranger (including Raptor) without roof rails, the Lazer Lamps Roof Mounting Kit, for 2015+ vehicles, comprises stylish satin black, stainless steel mounting brackets that fix within the vehicle’s roof ditch channel for a seamless roof installation. Available to fit either our Linear-42 (67mm height brackets) or Triple-R 24 Elite (95mm height brackets), both options deliver exceptional lighting performance coupled with high-end product design.

Effortlessly positioned into the lower front grille, secured to the vehicles bumper beam, the Lazer Lamps vehicle integration kit for the Ford Ranger (2016-Present), allows for flush mounting of our class-leading Linear-18 Standard, Elite (also avaliable with Position Light), or Elite with Intelligent Low Beam Assist, for an auxiliary LED driving light installation that impresses day and night. 

For an OE quality, auxiliary spotlight installation, the Lazer Grille Integration Kits include bespoke mounting brackets which allow for quick and easy fitting of Lazer High Performance LED Spotlights within the front grille of the most popular road cars, pick-up trucks, and light commercial vehicles. Designed to blend seamlessly within the original styling of each vehicle, the resulting lighting setup remains fully robust and secure, with extra protection against theft.