|
Driving Beam with Front Position Lamp
Dimensions: 245 x 178 x 109mm
Flood Beam
Dimensions: 142mm x 70mm x 110mm
Stop/Tail/Indicator Slimline Lamp units with reflector supplied in a pack of one. 12/24V. Suitable for trailer boards, trailers, kit-cars etc.
Stop / Tail / Indicator
Dimensions: 131 x 30 x 8mm
White Marker
Dimensions: 28mm x 200mm
Warning Beacon
Dimensions: 148mm x 55mm
Reverse / Flood Lamp
Dimensions: 73mm x 73mm x 31mm
The Dummy Load resistor is designed to be used on vehicles that have electronic components that are not LED compatible.
The use of an optional load resistor simulates the current draw used by a standard direction indicator bulb and enables the flasher unit to operate correctly.
Front / Rear Marker
Dimensions: 82mm x 101mm x 66mm
Illumination
Dimensions: 76mm x 9mm
"Ultra Thin" 4 LED directional warning strobe lamp from LED Autolamps.
The amber directional warning safety light comes with 2 screw or strong 3m self adhesive tape.
Ultra thin just 7.0mm thick.
Reverse / Flood Lamp
Dimensions: 100mm x 100mm x 31mm
Red Marker
Dimensions: 28mm x 200mm
LED Autolamps 7705 Series Angled Mounting Pad
Flood Beam
Dimensions: 81mm x 110mm x 67mm
Amber
Dimensions: 95mm x 34mm x 22mm
Amber Side Marker
Dimensions: 100mm x 38mm x 13mm
Red Line range, high-powered LED flood/work lamp with 13 X 3W LED
Specifically designed for the commercial market LED Autolamps LED Stop/Tail/Indicator Lamps have a durable weatherproof construction with potted components
Illumination Lamp
Dimensions: 15 x 30mm
DISCONTINUED - NEW MODEL MLB246R65ACM-MM
This new LED corner module from LED Autolamps provides an exceptionally wide spread of light – much more than conventional LED modules.
Fitting one EQ590AR65 LED module to each corner of a vehicle provides a full 360° warning coverage and is approved to ECE R65 category “T”
Ideal for vans with roof racks
Sold in Single units
The SSLED series low profile strobe light by LED Autolamps is designed for all applications.
Shock, water and dust proof, highly durable.
Available in 4 colours, Amber, White, Blue and Red.
Stop / Tail / Indicator / Reflector
Dimensions: 150mm x 80mm x 22mm
The LPR653 series R65 low profile strobe light by LED Autolamps is designed for all applications! shock, water and dust proof, highly durable.
Available in 2 colours, Amber and Blue.
Flood Beam
Dimensions: 160mm x 45mm x 63mm
Dimensions: 98 x 30 x 8mm
Illumination Lamp
Dimensions: 15 x 30mm
White Marker
Dimensions: 100mm x 44mm x 12mm
White Marker
Dimensions: 110mm x 40mm x 25mm