Lazer Lamps Land Rover Defender (2020+) Linear or Triple-R Roof Mounting Kit PN: 3001-DEF20-G2

Specifically engineered for the Land Rover Defender (2020+), the Lazer Lamps Roof Mounting Kits, comprises stainless steel brackets that fix to the vehicle’s roof ditch where there is already factory drilled mounting holes and are optimised for either our Linear-42 or Triple-R 24 Elite off-road LED spotlights. Included with the mounting brackets is a length of cable for modifying the relevant Lazer wiring kit to enable connection of your LED light bar without the need to drill any bodywork, for a quick, simple, and tidy finished install.

Manufactured from A2 stainless steel, and finished with a UV-stable, satin black powder coat, the brackets are fully corrosion resistant in line with automotive grade quality standards, as are the supplied countersunk anti-theft fasteners, which come in a variety of lengths from 20mm–80mm. To complete the mounting of different length light bars, spacers, of varying lengths, are provided to aid positioning.

The installation of the brackets to your vehicle is completed using anti-theft fasteners fixed within the roof ditch location either side of the Defender’s roof. Additional wiring extension and heat-shrink butt connectors are also supplied to help facilitate running the cable from the engine bay, up through the ‘A’ pillar and roof gutter, for a clean and tidy install.

When mounting the ECE Reg112 approved Linear-42 to activate with the vehicle’s high beams, if the vehicle has the LED Matrix headlight system as standard, it may not be possible to detect a 12V high beam signal. In these instances, it will be necessary to complete the electrical installation using a Lazer CAN Interface. For advice on how to check for a 12V high beam signal, please click here.

Please note the Roof Mounting Kits are not compatible with vehicles with panoramic sunroof.

• Complete one-stop solution for roof-mounting on Land Rover Defender (2020+)
• Optimised for either Triple-R 24 Elite or Linear-42 LED driving lights
• Completed without the need to drill bodywork
• Mounting brackets made from 3mm A2 stainless steel
• UV-stable, satin black powder coat
• Includes assortment of A2 stainless steel fixings with countersunk head
• Spacers facilitate positioning of different length LED light bars
• M6 fasteners facilitate mounting brackets to the roof ditch on the vehicle
• Manufactured in the UK

What's included:
- 2x Stainless Steel Mounting Bracket (LH/RH)
- 1x Anti-theft Fastener Set (various sizes)
- 1x Spacer Set (various sizes)
- 4x M6 Anti-Theft Fasteners
- 4x M8 Roof Ditch Spacers
- 1x 50cm wiring extension

* 'Start-up time' is the delay between the lamp receiving voltage, and light being emitted. Different Lazer lamps have different start-up times, depending on their electrical architecture, so we recommend that if you are buying two different types of Lazer lamp, for mounting on to the same vehicle, that you ensure you pick products with matching start-up time (either 5ms or 100ms, depending on the product). Please check the lamps technical section on each product page to be sure you are purchasing lights with the same start-up time for the best performance.

† Driver FOV flux is a measure of effective lumens taking consideration of the amount of light in a driver's 'field-of-view' defined as an area +/- 45o left/right, and +/- 10o up/down. For more information – click here.